HYDRONIC MII
Product Category: Coolant Heaters
| Diesel Variant (D) | |||||
| Voltage | V | 12 | |||
| Heat Output |
BTU | Low 8200 |
Medium |
High 17000 |
Boost |
| Water Throughout | Gal | 238 /hr |
againist |
0.1 bar |
|
| Fuel consumption | Gal | 0.08 | 0.16 | ||
|
Electrical Consumption Start - 0.8amps / Standby 10 amps |
Amp | 1.9 |
4.2 |
||
| Weight | lbs | 6.4 |
|||
| Size | |||||
| Gasoline Variant | |||||
| Voltage | V | 12 | |||
| Heat Output |
BTU | Low 8200 |
Medium |
High 17000 |
Boost |
| Water Throughout | Gal | 238 /hr |
againist |
0.1 bar |
|
| Fuel consumption | Gal | 0.08 | 0.16 | ||
|
Electrical Consumption Start - 0.8amps / Standby 10 amps |
Amp | 1.9 |
4.2 |
||
| Weight | lbs | 6.4 |
|||
| Size | |||||
DESCRIPTION
Espar MII (M2) - This coolant heater comes in 3 variants. 8K, 10K, and 12K btu outputs. The 8K heater is 100% bio capable. Espar of Michigan uses this heater in School Bus and Public Transit operations when engine preheat and supplemental interior heat is required. Complementing this package is a 7 day timer that will allow the engine and heating circuit to be preheated before the operator arrives. The MII can also be used in conjunction with fuel and hydraulic tank heaters on off road/construction equipment.
